CDRoller is a powerful, easy-to-use and low-cost toolset for CD/DVD data recovery. CDRoller supports industry-standard ISO 9660 file system, including Microsoft’s extensions for long file names support, so-called Joliet extensions. CDRoller also supports the discs formatted in UDF file system, including versions 1.02, 1.50, 2.0, 2.01 and also so-called UDF Bridge format. Support of wide set of CD, CD-R, CD-RW and DVD formats such as: CD-DA, CD-ROM, CD-WO, CD-ROM XA and Mixed-Mode CD, Stamped multisession CD, CD-MRW (”Mt. Rainier” CD-RW), DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-RAM.

Support of wide set of CD, CD-R, CD-RW and DVD formats such as:
• CD/DVD format CD-DA,
• CD/DVD format CD-ROM,
• CD/DVD format CD-WO,
• CD/DVD format CD-ROM XA and Mixed-Mode CD,
• CD/DVD format Stamped multisession CD,
• CD/DVD format CD-MRW (”Mt. Rainier” CD-RW),
• CD/DVD format DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-RAM.

Features:
• Effectively retrieves the data off the discs created by “drag and drop” CD/DVD writing software, such as well-known Roxio (Adaptec) and Ahead Nero software packages, CeQuadrat’s PacketCD, Sonic Solutions DLA, B’s CLiP and others.
• Recovers DVD video and photos, created by a wide set of standalone devices that record directly onto disks, including Hitachi, Canon, Panasonic, Samsung and Sony DVD camcorders as well as standalone video recorders.
• Includes a built-in Video Splitter. Splits the recovered VOB or VRO files into a several clips (scenes), automatically converting a “raw” DVD-video into MPEG files without loss of quality. Specially tested on the discs, recorded by Hitachi DVD camcorders.
• Burns a new DVD with recovered video that can be played back in the most DVD players.
• Recovers CD data written by Sony Mavica CD digital cameras.
• Includes a fault-tolerant UDF Reader. Provides direct access to UDF discs, including CDs and DVDs written by old versions of Roxio (Adaptec) DirectCD and Drag-To-Disk. Finds and retrieves accidently deleted files, files located in the corrupted folders, files on incorrectly closed disks, etc.
• “On-the-fly” unpacks the files initially compressed by Roxio (Adaptec) DirectCD.
• Retrieves back up files from the discs recorded in several stages (multisession discs).
• Includes a built-in CD/DVD data burner. There is no need to run third-party CD/DVD mastering software if you wish to burn a new DVD-video disc or backup your files and folders immediately after recovery. The “Burn” option is integrated into a common shell. Just write a new disc with recovered data shortly, without leaving CDRoller!
• Erases CD and DVD re-writable media. Supports quick and full erase methods.
• Examines disc sectors at low level. Displays the sector content in text, binary, hexadecimal or unicode mode. It also scans all sectors of a disc (selected track or file) for particular data. Recommended for engineering purposes and also for law enforcement and forensic investigators.
• Identifies the lost files on ISO/Joliet discs with the damaged file system (volume descriptors, path tables and directories), using the raw data only.
• Rescues the data from scratched, damaged or defective discs.
• Provides direct access to the hardware, bypassing the Windows File System. Looks for the lost tracks (sessions) every time when you insert a new disc into the drive
• Digitally extracts audio tracks into a wide set of wave formats.
• Tests CD/DVD readability.
• Extracts ISO Image file. Burns ISO Image file to a new disc.
• Catalogs files and folders into CD/DVD library.
• All features are integrated into a common and easy-to-use intuitive shell.

System Requirements:
To run CDRoller, you need at least:
Microsoft Windows 95/98/ME/2000/XP/2003/Vista/7 operating system,
Intel Pentium or compatible CPU,
256 MB of RAM,
12 MB free hard disk space for program installation and some additional space for CD/DVD images,
CD/DVD/Blu-ray drive(s). The devices with IDE or SCSI interfaces are highly recommended under Windows 95/98/ME.

Download :

http://depositfiles.com/files/w6exgudtd

Or :

http://letitbit.net/download/0771.0a64d59e64d9aa01925adeb3f3/CDR86170.rar.html

CD Copy Master / Key Function
• Copy both audio CD and data CD with best quality.
• Rip audio tracks from a personal CD and save them to your hard drive in various digital audio formats, like RAW, OGG, MP3 and WAV music files.
• Extract digital audio tracks from an audio CD into sound files on your hard disk.
• Write files to CD-R media.
• Erase the old data from CD-RW.
• Name the files which you want to rip, using information received from the CDDB source.
• Change and add the information obtained from the audio sources such as name of artist, album and tracks.
• Visually judge the progress of the ripping process.
• Easy-to-use and user-friendly interface.

Download From Rapidshare :

http://rapidshare.com/files/293221069/Sonne_CD_Copy_Master_1.0.1.341___Serial.rar

IsoBuster – программа, с помощью которой можно получить доступ к файловой системе CD/DVD-диска, минуя Windows. IsoBuster будет полезна при восстановлении данных с CD/DVD, если файлы невозможно прочитать из операционной системы. Программа работает напрямую с секторами, дорожками и сессиями дисков. Поддерживаемые форматы: CD-ROM, CD-ROM XA, CD-Text, D-i, VCD, SVCD, DVD и DVCD. IsoBuster может работать с образами дисков, конвертировать файлы и предоставлять информацию о приводе, даже если он виртуальный…

IsoBuster is an award winning , highly specialized and easy to use CD and DVD data recovery tool. It supports all CD and DVD formats and all common CD and DVD file-systems… Rescue lost files from a bad or trashed CD or DVD disc, save important documents, precious pictures, video from the family, your only system backup, … Start up IsoBuster, Insert a CD or DVD, select the drive (if not selected already) and let IsoBuster mount the media. IsoBuster immediately shows you all the tracks and sessions located on the media, combined with all file-systems that are present. This way you get easy access, just like explorer, to all the files and folders per file-system. Instead of being limited to one file-system that the OS picks for you, you have access to “the complete picture”. Access data from older sessions, access data that your OS (e.g. Windows) does not see or hides from you etc.

Isobuster interprets CD image files, such as:
*.DAO (Duplicator), *.TAO (Duplicator), *.ISO (Nero, BlindRead, Creator), *.BIN (CDRWin), *.IMG (CloneCD), *.CCD (CloneCD) , *.CIF (Creator), *.FCD (Uncompressed), *.NRG (Nero), *.GCD (Prassi), *.P01 (Toast), *.C2D (WinOnCD), *.CUE (CDRWin), *.CDI (DiscJuggler), *.CD (CD-i OptImage), *.GI (Prassi PrimoDVD), *.PXI (PlexTools), *.MDS (Alcohol), *.MDF (Alcohol), *.VC4 (Virtual CD), *.000 (Virtual CD), *.B5T (BlindWrite), *.B5I (BlindWrite), *.DMG (Apple Macintosh), *.IBP (IsoBuster), *.IBQ (IsoBuster), *.NCD (NTI).

IsoBuster full feature list:
• Data recovery from all possible CD, DVD and Blu Ray (BD & HD DVD) formats : CD-i, VCD, SVCD, SACD, CD-ROM, CD-ROM XA, CD-R, CD-RW, CD-MRW, … DVD-ROM, DVCD, DVD-RAM, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD+MRW, DVD+R Dual Layer, DVD-R Dual Layer, DVD+RW Dual Layer, DVD+VR, DVD+VRW, DVD-VR, DVD-VRW, DVD-VM, DVD-VFR, BD-ROM, BD-R, BD-R DL, BD-RE, BD-RE DL, BD-R SRM, BD-R RRM, BD-R SRM+POW, BD-R SRM-POW, BDAV, BDMV HD DVD-ROM, HD DVD-R, HD DVD-R DL, HD DVD-RW, HD DVD-RW DL, HD DVD-RAM, HD DVD-Video, … And the list continues …
• All device access, media access, data gathering and interpretation is done exclusively by the software. It does not rely on Windows to provide or interpret the data and so can work completely independent from Windows’ limitations.
• Better Error handling and several retry-mechanisms to aid you in getting the data anyway.
• The use of both generic and alternative ways to get to the data, get the best out of your CD/DVD-ROM drive.
• The use of primary and secondary file-systems to get to the data and/or make use of file system data that might be ignored or ‘forgotten’ by popular OS. Explore the alternatives.
• CDs stay ‘readable’ after problems (such as Buffer Under-run, …)
• Read / Extraction from open sessions.
• All sessions, including older ones, are accessible and can be recovered.
• Supports mounting several virtual sessions inside a single DVD+RW or DVD-RW track
• Read and Extraction of files, CD/DVD images, tracks and sessions from all optical media.
• Scanning for lost UDF files and folders. More on UDF recovery.
• Scanning for lost ISO9660 / Joliet sessions.
• Scanning for files based on their file-signature
• Scanning for IFO / BUP / VOB file-systems on VIDEO and AUDIO DVDs
• Find lost data on CDs, DVDs, BDs or HD DVDs, created with integrated drag and drop applications, otherwise also known as packet writing software. Optimized, but not exclusive, for : Roxio Direct CD, Roxio Drag-to-Disc, Ahead / Nero InCD, Prassi / Veritas / Sonic DLA, VOB / Pinnacle Instant-Write, CeQuadrat Packet CD, NTI FileCD, BHA B’s CLiP, Mircrosoft Windows XP and VISTA, Sony abCD, …
• Support for Direct CD compressed files. Decompression on the fly.
• Built in UDF Reader, UDF 1.02 (e.g DVDs), UDF 1.5 (e.g. Packet writing on CD-R, DVDR, CD-RW and DVDRW), UDF 2.01, 2.50, 2.60 (e.g. BD-R SRM+POW), …
• Find lost pictures created and saved to CD or DVD with Sony Mavica, other digital cameras or other devices with embedded UDF write functionality.
• Find lost movies created and saved to CD,DVD, BD or HD DVD, with Hitachi, other digital cameras or other devices with embedded UDF write functionality.
• Auto find extensions based on file content to try and give an appropriate name to an orphaned file. This built in file identifier assigns the proper extension to the file so that Windows applications can open the file. Only needed for orphaned files without a name.
• Support for Mount Rainier CD-RW and DVD+RW discs in MRW compatible and non-MRW compatible drives. Auto detection and automatic remapping which can be switched off or forced at all times. Built in MRW remapper / reader. (Built in Method 3 remapper)
• Support for formatted CD-RW discs mounted in very old drives that do not know the CD-RW fixed packet format yet. Auto detection and automatic remapping which can be switched of or forced at all times. Built in Method 2 remapper.
• Built in HFS Reader, supporting HFS and HFS+, the Apple Mac file systems.
• Transparent built in support for Mac Resource Fork extensions in the ISO9660 File-System
• Transparent built in support for Mac Resource Fork extensions in the UDF File-System
• Supports multiple Mac Partitions on one medium (e.g. multiple partitions on a CD or in a dmg file)
• Includes a vast range of features for Mac files support on PC (HFS, ISO9660, UDF), including Mac Binary extraction of files.
• Recover data from blanked or quick formatted DVD+RW media.
• Mpg (*.dat) Extraction and dat2mpg ‘in one’ from SVCD and VCD
• Ability to create managed image files (*.IBP / *.IBQ).
• Enormous file system coverage and different ways to use them all (find the one suited best for your needs). CDs and DVDs often have different file-systems pointing to the same files. This offers possibilities.
• Rock Ridge (e.g. for Commodore users, Server use, etc.)
• Finds VIDEO and AUDIO IFO / BUP / VOB file-systems independently from other file-systems
• Transparent support for (open) DVD+VR(W) discs, remapping of the content etc. Open +VR discs’ files can be seen and extracted right away.
• Show (and allow to extract) the Nero project file if available on the optical disc
• Support for the CD-i file-system and the different behavior from drives trying to mount a CD-i disc.
• Information and file system properties (a must for FS developers)
• CD/DVD/HD DVD/BD Surface scan to see if there are physical read errors.
• Opens checksum files (*.md5) and automatically verifies the image with the checksum file.
• Check if all files and folders are readable without having to extract all data to HD.
• Single sector extraction. Extraction of CD/DVD/BD/HD DVD blocks (e.g. for engineering purposes)
• Sector Viewer. Check a sector’s content in IsoBuster’s editor and print or save to HD. Engineers and computer savvy people find missing data making use of Sector View.
• Compile (and edit, save, print) lists of all files that contain physical read errors.
• Compile lists of all files, including their Logical block address (ideal to find the logical play order for mp3 CDs)
• CD-Text support from CD and various image files ( *.PXI, *.CCD, *.B5T and *.CUE image files).
• Creation of image files (*.ibp and *.ibq,*.iso, *.bin, *.tao)
• Creation of checksum files (*.md5)
• Creation of cue sheet files (*.cue)
• Conversion of all supported image files to bin/cue files.
• Handles opening of multi-file image files.
• Extraction of Audio tracks to wave files.
• Play audio analogue. Instruct the drive to play the audio through the analogue output.
• Ability to pause a number of seconds between retries to allow the drive to “recover” (useful for older drives in combination with marginally readable media)
• Creation of multi-file image files or disc spanning to specified size
• Support for bootable CDs and DVDs. Support for the El Torito standard.
Perfect aid to slipstream Windows installation CDs
• Add, Edit, Delete files found based on their signatures.
• Show file extents. (Show the different parts of a file, when it is fragmented on disc)
• Ability to add/edit extents on custom created files (e.g. Lost and Found and Customizable file system)
• Ability to add a customizable file system (where you can add, edit files, for engineering purposes)
• Support for command line parameters
• Comprehensive help file (also available online)

New:
Today we released IsoBuster 2.6 after an extensive Alpha and Beta test period.
This version is a must upgrade. We hope that you enjoy it. IsoBuster 2.6 is fully Windows 7 compatible

Download :

Letitbit.net
TurboBit.net
Extabit.com
Depositfiles.com